Operating voltage range: DC 12.0-18.0 Volt
Circuit power: Max. Charge
power
2x400Watts
Max. Discharge power 2x25Watts
Charge current range: 0.1-20.0A
Discharge
current range: 0.1-5.0A
Current drain for balancing Li-Po/Ion/Fe:
300mA/cell
Li-ion/Fe/Polymer cell count: 1-6cells
NiCd/NiMH battery cell
count: 1-15cells
Pb battery voltage: 2-20V
Special features
Optimized operating software
Ultimate 400W?2 features the
so-called AUTO function that set the feeding current during
the process of
charging or discharging. Especially for Lithium batteries, it can prevent
the
overcharging which may lead to an explosion due to the user's fault. It
can disconnect the
circuit automatically and alarm once detecting any
malfunction. All the programs of this
product were controlled through two way
linkage and communication, to achieve the
maximum safety and minimize the
trouble. All the settings can be configured by users!
Internal independent lithium battery
balancer
Ultimate 400W?2 employs an individual-cell-voltage
balancer. It isn’t necessary to
connect an external balancer for balance
charging.
Balancing individual cells battery discharging
During the
process of discharging, Ultimate 400W?2 can monitor and balance each cell
of
the battery individually. Error message will be indicated and the process will
be ended
automatically if the voltage of any single one cell is abnormal.
Adaptable to various type of lithium battery
Ultimate
400W?2 is adaptable to various types of lithium batteries, such as Li-Ion,
LiPo
and the new LiFe series of batteries.
Fast and storage mode of lithium battery
Purposes to
charge Lithium battery varies, fast charge reduce the duration of
charging,
whereas store state can control the final voltage of your battery,
so as to store for a long
time and protect useful time of the battery.
Maximum safety
Delta-peak sensitivity: The automatic
charge termination program based on the principle
of the Delta-peak voltage
detection. When the battery's voltage exceeds the threshold,
the process will
be terminated automatically.
Automatic charging current limit
You can set up the
upper limit of the charging current when charging your NiCd or NiMH
battery;
it is useful for the NiMH battery of low impedance and capacity in the
'AUTO'
charging mode.
Capacity limit
The charging capacity is always
calculated as the charging current multiplied by time. If
the charging
capacity exceeds the limit, the process will be terminated automatically
when
you set the maximum value.
Temperature threshold
The batteries internal chemical
reaction will cause the temperature of the battery to rise.
If the
temperature limit is reached, the process will be terminated. This function
is
available by connecting temperature probe, which is included in the
package.
Processing time limit:
You can also limit the maximum
process time to avoid any possible defect.
Data store/load
For user’s convenience, it can store
maximum 10 data of different batteries. You can
establish the data contains
program setting of the battery to charge or discharge. These
data can be
called back at any time you need and the process can be executed
without
program setting.
Cyclic charging/discharging
1 to 5 cyclic and
continuous process of charge>discharge or discharge>charge is
operable
for battery refreshing and balancing to stimulate the batteries
activity.