Features
Vehicle Specifications- Pre-assembled shocks, diffs, and turnbuckles with Factory Team shock and diff fluids included
- Factory Team 16mm Big Bore threaded, hard-anodized shocks feature heavy-duty 4mm TiN-coated stainless steel shock shafts for maximum smoothness
- Updated 5mm 7075 blue aluminum shock towers allow the driver to stand the shock angle up for a more aggressive suspension
- Optimized front upper camber link bushings allow for easier tuning and maintenance
- 7075 blue aluminum suspension mounts front and rear
- Molded bushings allow for easy and quick adjustment of rear toe-in, rear anti-squat, and front kick-up
- Optimized steering geometry for more consistency and reduced bump steer
- Updated wing mount with additional clearance for 16mm shocks
- Molded battery tray supports two R.O.A.R. approved 1:10 scale size 7.4v LiPo battery packs with room for foam pads
- Molded composite front and rear chassis braces
- Factory Team 83mm wheels, Pro-Line M3 Holeshots with molded
- Lightweight blue aluminum motor mount
- Factory Team 7075 blue aluminum one-piece top plate
- Lightweight 3mm hard-anodized chassis
- 4.30:1 ratio gearboxes for maximum punch
- Two-piece split-center diff mount allows quick and easy access to the
- Caster blocks adjust 14?, 16?, or 18? with molded inserts
- 3.5mm light CVA drivetrain with full ball bearings
- Rear molded CVA boots to keep dirt and mud out of rear joints
- Blue aluminum hexes and nylon locking wheel nuts
- Tough steel-alloy shock stand-offs
Power Source: | Electric |
Terrain: | Off-Road |
Body Style: | Buggy |
Scale Size: | 1:8 Scale |
Assembly Level: | Kit* |
Length: | 470mm (18.5in) |
Width: | 305mm (12.01in) |
Wheelbase: | 323mm (12.72in) |
Weight: | 3570g (7.87 lbs) |
Internal Gear Ratio: |
4.3 |
Drive: | 4WD |
* This vehicle comes as a kit and must be
fully assembled by the user. Electronics and/or an engine/motor may be
required.
Required to Complete
- R/C 2-channel surface frequency radio system
- Batteries: qty 1 or 2 6-cell NiMH type packs (7.4v) OR qty 1 or 2 2-cell LiPo type packs (7.4v, 11.1v, or 14.4v, depending on the compatibility of the speed control)
- Battery charger (peak detection charger recommended)
- Electronic speed control
- RC electric motor
- Tire adhesive
- Paint for Lexan body
- Tools: Phillips screwdriver, needlenose pliers, pencil-type soldering iron with Rosin core solder to solder motor wires, thread-locking compound, hobby knife, precision ruler, body scissors