Operating voltage range: DC 12.0-18.0 Volt
Circuit power: Max. Charge power
400Watts
Max. Discharge power 25Watts
Charge current range: 0.1-20.0A
Discharge
current range: 0.1-5.0A
Current drain for balancing Li-Po/Ion/Fe:
300mA/cell
Li-ion/Fe/Polymer cell count: 1-6cells
NiCd/NiMH battery cell
count: 1-15cells
Pb battery voltage: 2-20V
Net Weight: 720g
Dimension:
145x141x60mm
Special
features
Optimized operating software
Ultimate 400W features the so-called AUTO function that set the feeding
current during the process of
charging or discharging. Especially for Lithium
batteries, it can prevent the overcharging which may lead to
an explosion due
to the user's fault. It can disconnect the circuit automatically and alarm once
detecting any
malfunction. All the programs of this product were controlled
through two way linkage and communication,
to achieve the maximum safety and
minimize the trouble. All the settings can be configured by users!
Internal independent lithium battery
balancer
Ultimate 400W employs an individual-cell-voltage balancer.
It is not necessary to connect an external
balancer for balance charging.
Balancing individual cells battery discharging
During
the process of discharging, Ultimate 400W can monitor and balance each cell of
the battery
individually. Error message will be indicated and the process
will be ended automatically if the voltage of any
single one cell is
abnormal.
Adaptable to various type of lithium battery
Ultimate
400W is adaptable to various types of lithium batteries, such as Li-ion, LiPo
and the new LiFe series
of batteries.
Fast and storage mode of lithium battery
Purposes to
charge Lithium battery varies, fast charge reduce the duration of charging,
whereas store state
can control the final voltage of your battery, so as to
store for a long time and protect useful time of the battery.
Maximum safety
Delta-peak sensitivity: The automatic
charge termination program based on the principle of the Delta-peak
voltage
detection. When the battery's voltage exceeds the threshold, the process will be
terminated
automatically.
Automatic charging current limit
You can set up the
upper limit of the charging current when charging your NiCd or NiMH battery; it
is useful for
the NiMH battery of low impedance and capacity in the 'AUTO'
charging mode.
Capacity limit
The charging capacity is always calculated
as the charging current multiplied by time. If the charging
capacity exceeds
the limit, the process will be terminated automatically when you set the maximum
value.
Temperature threshold
The battery internal chemical
reaction will cause the temperature of the battery to rise. If the
temperature
limit is reached, the process will be terminated.
This
function is available by connecting temperature probe, which is not included in
the package.
Processing time limit
You can also limit the maximum
process time to avoid any possible defect.
Data store/load
For user’s convenience, it can store
maximum 10 data of different batteries. You can establish
the data contains
program setting of the battery to charge or discharge. These data can be
called
back at any time you need and the process can be executed without
program setting.
Cyclic charging/discharging
1 to 5 cyclic and
continuous process of charge>discharge or discharge>charge is operable for
battery
refreshing and balancing to stimulate the batterys activity.