MONGOOSE MICRO ESC SPECIFICATIONS |
Forward/Reverse: FWD/BRK/REV (brushless mode); FWD/BRK (brush mode) |
Input Voltage: 2-3 Li-Poly cells or 4-9 Ni-MH/Ni-Cd cells (1.2V/cell) |
On-Resistance*: 0.0038 ohms per phase (brushless/brush) |
Footprint: 1.15"" x 0.95"" (29 x 24.3 mm) |
Weight: 0.77 oz. (21.7 grams) |
Rated & Braking Current*: 40 amps per phase (brushless/brush) |
Power Wires: 16-gauge |
BEC: 6.0 volt / 2.0 amps |
Motor Limit: any Novak Micro (brushless); any 380-size (brushed) |
Battery Plug: none |
Motor Plug: 2 mm connectors |
Voltage Cut-Off: 6.25 volts (2S), 9.375 (3S) [when Li-Poly Cut-Off Circuitry is enabled] |
THREE-80 MICRO PRO BRUSHLESS MOTOR SPECIFICATIONS |
|
Turns: 8.5 (#3450), 10.5 (#3451), 13.5 (#3452) |
|
Design: Sensor-based |
|
Input Voltage: 2-3 cell Li-Po or 4-9 cells Ni-MH/Ni-Cd(1.2 volts/cell) |
|
Watts: 210 (#3450), 165 (#3451), 125 (#3452) |
|
Kv (unloaded): 9,000 (#3450), 7,300 (#3451), 6,000 (#3452) |
|
Motor Size: 380 size: 1.02" D x 1.48" L (26 D x 37.7 L mm) |
|
Motor Weight with wires: 2.54 oz. (72 grams) |
|
Shaft Diameter: 1/8" [accepts all existing pinion gears] |
|
Bearing Size: Oversized (1/2" x 3/16") Front; Standard Rear (7mm x 3mm) |
|
Protection: Thermal |
|
Magnet: Sintered Nickel-plated Neodymium (one-piece, multi-pole cylindrical) |